Publicações internas
Manuais VPN Manuais rede sem fios EDUROAM

Configure eduroam wireless network with Windows Vista / Windows 7

  1. Go to “Start”, right click on “Network”, then click “Properties”.
  2. On the “Network and Sharing Center” window, select “Manage wireless networks”:

  3. Figure 1 – Acess to "Manage wireless networks".

  4. If you have the "eduroam" network configured, remove it. Then click “Add”:
  5. Remover rede sem fios "e–U", caso se aplique.
    Figure 2 – If applicable remove "eduroam" wireless network .

  6. Select “Manually create a network profile”.
  7. Enter the network name and select the options as shown:


    Figura 3 – Mannually create a network profile.

  8. Enter the network name and select the options as shown:
    • Network name: eduroam
    • Security type: WPA2–Enterprise
    • Encryption type: AES
    • Start this connection automatically: Checked
    Then click Next.


    Figura 4 – Manually connect to a wireless network

  9. Choose "Change connection settings":

  10. Figure 5 – Change connection settings.

  11. On the “Connection” tab, check the options as shown:
    • "Connect automatically when this network is in range": Checked
    • "Connect to a more preferred network if available": Checked
    • "Connect even if the network is not broadcasting": Unchecked
    Then open the “Security” tab.

  12. Figure 6 - eduroam Wireless network properties.

  13. Check the options as shown:
    • Security type”: WPA-Enterprise
    • "Encryption type": TKIP
    • "Choose a network authentication method": Microsoft: Protected EAP (PEAP)
    • “ Remember my credentials for this connection …”: Checked
    Then click “Settings”.

  14. Figure 7 – eduroam Wireless network properties.

  15. Check the options as shown:
    • “Validate server certificate”: Unchecked
    • “Select Authentication Method”: Secured password (EAP–MSCHAP v2)
    • The only radio button checked should be “Enable Fast Reconnect”.
    Then click “Configure...”.

  16. Figure 8 – Protected EAP Properties.

  17. On the “EAP MSCHAPv2 Properties” window, uncheck the option “Automatically use my Windows logon name and password (and domain if any).” and click “OK” to proceed.

  18. Figura 11 –EAP MSCHAPv2 Properties.

  19. After the above changes on the "Security" tab, click on the "Advanced Settings" button (only for Windows 7):

  20. Figura 12 – eduroam Wireless network properties.

  21. Click on the select box "Specify authentication mode" and choose "User Authentication" (only for Windows 7):

  22. Figura 12 – Advanced settings

  23. Windows will establish the connection to the newly created network. Make sure you’re in a covered area. If the eduroam network is available, you’ll be prompted with the message “Additional information is required to connect to eduroam”. Click it to enter your credentials (only Windows vista).
    Enter your username and password, as provided by SI:

  24. Figura 13 – User authentication.

  25. The system will start the authentication process and an icon as shown below will appear when connection is established:


Figura 15 – Windows bar..

Destaques

Manuais de configuração da rede wireless

Fénix – Manuais de apoio

Conheça todos os materiais de apoio ao sistema Fénix.

O seu endereço IPv4 é 54.144.100.123